Browse/search for people

Publication - Professor Andrew Nix

    Millimeter wave channel measurements in a railway depot


    Bulut, B, Barratt, TH, Kong, D, Cao, J, Tila, F, Freire, AL, Armour, S, Beach, M & Nix, A, 2018, ‘Millimeter wave channel measurements in a railway depot’. in: 2017 IEEE 28th Annual International Symposium on Personal, Indoor, and Mobile Radio Communications (PIMRC). Institute of Electrical and Electronics Engineers (IEEE)


    Millimeter wave (mmWave) communication is a key enabling technology with the potential to deliver high capacity, high peak data rate communications for future railway services. Knowledge of the radio characteristics is of paramount importance for the successful deployment of such systems. In this paper mmWave channel measurements are reported for a railway environment using a wideband channel sounder operating at 60GHz. Highly directional antennas are deployed at both ends of the link. Data is reported for path loss, root mean square (RMS) delay spread and K-factor. Static and mobile measurements are considered. Analysis shows that the signal strength is strongly dependent (up to 25dB) on the azimuth orientation of the directional transmit and receive antennas. A path loss exponent of n=2.04 was extracted from the Line-of-Sight measurements with optimally aligned antennas. RMS delay spreads ranged from 1ns to 22ns depending on antenna alignment. 50% of the measured K-factors were found to be less than 6dB. We conclude this is the result of ground reflections in the vertical Tx-Rx plane.

    Full details in the University publications repository