Skip to main content

Unit information: Optical Networks in 2016/17

Please note: you are viewing unit and programme information for a past academic year. Please see the current academic year for up to date information.

Unit name Optical Networks
Unit code EENGM0003
Credit points 10
Level of study M/7
Teaching block(s) Teaching Block 2 (weeks 13 - 24)
Unit director Professor. Reza Nejabati
Open unit status Not open




School/department Department of Electrical & Electronic Engineering
Faculty Faculty of Engineering


The objective of this course is to gain an understanding of the technologies and principles involved in the design and construction of a modern optical networks. This unit starts with an introduction to the networks requirements of telecommunication operators to support current, emerging and future Internet applications. Following this introduction, various optical networking technologies and optical network design principles addressing these requirements are introduced. This unit will focus on existing and state-of-the-art as well as emerging and future optical network technologies including Wavelength Division Multiplexed (WDM) network, Time Division Multiplexed (TDM) network , Optical frequency division multiplexed network and optical sub-wavelength switched network. The course will also address optical node design, optical network control and management, Ethernet and IP over Optical Layer for aforementioned transport technologies.

Intended learning outcomes

On successful completion of this unit, the students will have a comprehensive understanding of the key issues and building blocks of modern optical networks including:

1. Explain and discuss issues associated with optical transport network to address requirements of emerging and future internet applications

2. Describe feature of WDM, OTDM, SDH/SONET, OTN , optical OFDM and sub-wavelength switched networks and their design principles including switching and transceiver

3. Identify the issues associated with transporting Internet data over various optical transport technologies

4. Identify control and management requirements for modern optical networks

5. Explain principle of GMPLS control plane technologies and identify its application to modern optical network

6. Describe routing and wavelength assignment process in optical network and identify its challenges

7. Compare the main features of WDM, optical OFDM, TDM and optical sub-wavelength switched networks

Teaching details


Assessment Details

Exam, 2 hours, 100% (All ILOs)

Reading and References

Textbook (required): “Optical Networks: A Practical Perspective “, Rajiv Ramaswami, Kumar Sivarajan, and Galen Sasaki, , 3rd Edition, Morgan Kaufman Publishers, 2009

Texbook (required): Optical WDM Networks”, Biswanath Mukherjee, Springer, 2006

Textbook: “IP over WDM: Building the Next Generation Optical Internet”, Sudhir Dixit, Wiley , 2003

Textbook: “ Optical Network Control: Architecture, Protocols, and Standards”, Greg Bernstein, Bala Rajagopalan, Debanjan Saha, Addison Wesley, 2004

Textbook: “DWDM: Networks, Devices, and Technology”, Stamatios V. Kartalopoulos, Wiley-IEEE Press ,2002

Textbook: GMPLS: Architecture and Applications”, Adrian Farrel and Igor Bryskin, Morgan Kaufmann, 2006

Texbook: “Enabling Optical Internet with Advanced Network Technologies”, Javier Aracil, Franco Callegati, Springer, 2009